Solenoid valve

These valves use the energy stored in the pressurized fluid to actuate the valving mechanism. They require the minimum pressure differential specified for proper valve operation. A direct-acting, normally closed solenoid valve is an integral part of the pilot-operated valve and is used to affect the balance of pressure above and below a diaphragm or piston.

2way_Solenoid Valve

SV-3100 Series 2-way solenoid valves are direct-acting valves featuring brass and stainless steel construction and FKM seal material.The temperature range of -10 to 137°C (14 to 280°F) is ideal for neutral media such as compressed air, inert gases, water, and synthetic oils.

Pilot & Mechanical Valve

These valves provide the same high level of corrosion resistance as stainless steel, and at a lower cost. They are USDA accepted for food and beverage handling. Supplied standard with IP65/ NEMA-4 strain relief electrical connector for 18 gage 2-wire with ground connection.

Air Units

Air Units are designed for use as a single in-line unit or as part of a modular compressed air preparation supply system. This air line filter / regulator is designed for high efficiency water and particle removal, and comes with a push to lock adjusting knob.

Standard Cylinder

Our standard range of pneumatic cylinders is available in Bore sizes ranging from 32mm diameter to 100mm diameter. These pneumatic cylinders are made of Hard anodised aluminium cylinder tubes offer a high resistance to corrosion and low internal friction.

Compact Cylinder

Available with a variety of features, including a wide range of bore sizes 12mm to 100mm and customize stroke lengths,

  • Light weight & space saving
  • Easy installation
  • Easy dismantling for maintienance
  • Easy mounting of sensor switch
  • Single / Double rod, adjustment stroke, internal /external thread as your requirement.
  • With or without magnet.

Mini Cylinder

Available with a variety of features, including a wide range of bore sizes 6mm to 40mm and customize stroke lengths,

  • Non lubrication
  • High quality-long service life
  • Cylinder mountings available with a comprehensive selection of mountings for fixed or flexible installation
  • Unified design, most parts of each type are interchangeable among each other
  • In addition to Rc threads, G NPT also available

Guide.Slide Cylinder

Available with a variety of features, including a wide range and customize stroke lengths.

Rotary Clamp

We provide quick swing-and-clamp movement for increased productivity. These clamps are intended for quick clamping in secondary manufacturing operations on metallic or non-metallic products. These double-acting, pneumatic swing clamps offer a wide combination of features that make them uniquely adaptable to applications such as welding and assembly operations. We offers a wide range of models in a variety of bore sizes and mounting styles.standard pneumatic swing clamps are non-locking clamps that provide a clamping force in direct proportion to bore size and inlet pressure.

Gripper

physical interface between a robot arm and the work piece. This end-of-arm tooling (EOAT) is one of the most important parts of the robot. One of the many benefits of material handling robots is the reduction of part damage.

Rodless Electric Actuators

They feature a fixed body and sliding carriage. They are ideal for applications that require load guiding, low to moderate speed, and high force. Carriage Actuators come complete with power supply.

Stopper Cylinder

Shock absorbers are available as safety stops, and magnetic sensors can be mounted on cylinder surfaces when input signals are required for controllers

Other Auxiliary Equipments

Various products all available in this range
Plastic sensor, PE silencer, Brass Silencer, Silencer Throttle Valve, Check Valve, Flow Control Valve, Quick exhaust valve, Shuttle Valve, PU Tube, Female Rod Ends, Shock Absorbers, Pilot Check Valve, Hydraulic Speed Controllers, Coupler, Jet cooler etc

Pisco

  • The tube fitting comes in a wide variety of tube and thread sizes
  • Even after installation the direction of the tubing can be changed freely ( Elbow, Long Elbow, Universal Elbow, ect)
  • Speed Controller controls the operation speed of a driving devices
  • The lead-out directions are free thanks to rotation of the resin body and joint.